1. If you are new to data recovery, then run the software in default mode. Select the second option and click on OK or click on the button provided with this option. After that you will be in a mode as shown below to precede further click on Next button.

2. If you are unable to see your drives in My Computer then select fourth option. This will help to detect your drive. After that you will be in a mode as shown below to precede further click on Next button.

3. Select the physical drive and click on Next button as shown below.

4. By default the range of drive sectors will be show from “0” sector to the ending sector of the first or master physical drive and the radio button of sector is checked if you want to see the size in GB then select the radio button along with GB. You can specify the range up till you want to scan the drive and click on Next button.

5. Select the scan option and click on Next button, by default the “Standard Scan” is selected.

6. If the shown figures are correct as you selected before then click on Next button or you can move backward to change the settings.

7. After that the partition scan process will be started. Upon 100% completion you will be shown detected partitions. To move further, click on Next button.

8. If you want to scan again the drive then select the desired option otherwise click on Finish to finish the partition scanning process.

9. If you have selected the second or third option, then a tree of detected drives will be shown as below:

10. Then, Right click on the drive and select the scan option or select the drive and click on the Find Data button.

11. System while scanning your drive is shown as below:

12. After completion of scan, a tree of deleted and normal files and folders will be created. Deleted files or folder will be highlighted in red as shown below:

Caution: It is strongly recommended never to save files or folder on the same drive where lost data reside; you may damage or totally lose the data.

13. Right click on the file or folder that you want to recover and select recover all option or after selecting the file(s) you can also click on Recover File to recover desired file(s) and if you select the folder you can also click on Recover Directory to recover the desired folder(s). To recover the whole drive, click on the Recover Drive button in tool bar. The next step is to select some other drive to save your recovered data.

NOTE:  System will enable write protection on your infected partition, so you will not be able to recover data in the same drive that you have recently scanned.

System while recovering your valuable data.